ASA8.2 version and the following ipsec tunnel configuration templates

Configuration template: interface e0/0nameif insidesecurity-level 100ip address x.x.x.x 255.255.255.0 (modified to local private network IP and mask)!

2022-06-01 Network Security 我要分享

Juniper bgp configuration

1.EBGP configuration set protocols bgp group ebgptest type externalset protocols bgp group ebgptest local-address

2022-06-01 Network Security 我要分享

4. The IP address x.x.x.x you entered for this network adapter has been assigned to another adapter

Today, after swapping the hard drives of two servers of the same model, we encountered the following problems when configuring IP: the solution is as follows: 1. Execute the following named set devmgr_show_nonpresent_devices=12set devmgr_sh first

2022-06-01 Network Security 我要分享

Irssi Error [Cannot assign requested address: x.x.x.x]

Symptom:/connect irc.anyserver.comIrssi: Unable to connect server irc.freenode.net port 6667 [Cannot

2022-06-01 Network Security 我要分享

How to check whether the Linux machine has been hacked

The editor will share with you how to check whether the Linux machine has been hacked. I hope you will get something after reading this article. Let's discuss it together. 1. The intruder may delete the log information of the machine to see if the log information still exists or has been emptied.

2022-06-01 Servers 我要分享

What to do after the Linux server is hacked?

This article mainly introduces what to do after the Linux server is hacked, the article is very detailed, has a certain reference value, interested friends must read it! First of all, to calm down, drink water pressure shock. Security is always relative, and even a secure server may be attacked. With the opening

2022-06-01 Servers 我要分享

How to check whether the Linux machine has been hacked

This article shows you how to check whether the Linux machine has been hacked, the content is concise and easy to understand, it will definitely brighten your eyes. I hope you can get something through the detailed introduction of this article. As open source products become more and more popular, as a Linux operation and maintenance engineer

2022-06-02 Development 我要分享

What to do after the Linux server is hacked

Editor to share with you how to deal with the Linux server after being hacked, I believe most people do not know much about it, so share this article for your reference, I hope you can learn a lot after reading this article, let's go to know it! With the increasing popularity of open source products

2022-06-01 Servers 我要分享

How to add and delete gateways in Linux system

How to add and delete gateways in Linux system: 1. Temporary add gateway route add default gw x.x.x.x temporary add gateway, effective immediately 2. Permanently add gateway: vim / etc/sysconfi

2022-06-03 Servers 我要分享

Common shortcuts to windows

Ipconfig / all / / View computer configuration information ping X.X.X.X / / check network connectivity regedit / / register list editor services.msc / / Local Service telnet X.X.X.X / /

2022-06-02 Servers 我要分享

How to configure IP address in Ubuntu

In this issue, the editor will bring you about how to configure IP addresses in Ubuntu. The article is rich in content and analyzes and narrates it from a professional point of view. I hope you can get something after reading this article. First, use the command to set the ip address of ubuntu 1. Modify the configuration file

2022-06-01 Servers 我要分享

Cisco UBR10012 uses DRL to protect cpu from high cpu problems

Cisco UBR10012 has high cpu problems in the process of daily maintenance, and it is checked that the DHCPD Receive process occupies too much. It indicates that the device has received excessive DHCP messages. In order to avoid affecting normal business traffic, configure DRL (Diver)

2022-06-01 Network Security 我要分享

Ma680t opening guidance

Carrier MA5680T opening configuration enable turn on privileged config enter terminal configuration mode Sysname xxxx-xxxx add device name Terminal user name add user Huawei username Hua

2022-06-01 Network Security 我要分享

The influence of proxy_pass on back-end request in nginx virtual path

Suppose the configuration in nginx looks like this: server {listen 80 position serverroomname x.x.x.x. . . . . .location / subdir {proxy_pass http://

2022-06-03 Servers 我要分享

The method of setting address by using command in Ubuntu IP system configuration file

This article mainly explains "the method of setting the address by using commands in the Ubuntu IP system configuration file". The explanation in this article is simple and clear, and is easy to learn and understand. now please follow the editor's train of thought to study and learn "Ubuntu IP system configuration file makes

2022-06-01 Servers 我要分享

ERROR: Error appeared during Puppet run: x.x.x.x _ keystone.pp

Error ERROR: Error appeared during Puppet run: x.x.x.x_keystone.ppError: / stage [main] / Keystone::Db::Syn

2022-06-01 Database 我要分享

How to configure DNS in Ubuntu system

This article mainly introduces "how to configure DNS in Ubuntu system". In daily operation, I believe many people have doubts about how to configure DNS in Ubuntu system. The editor has consulted all kinds of materials and sorted out simple and easy-to-use operation methods. I hope to answer "Ubuntu system" to everyone.

2022-06-01 Servers 我要分享

Example Analysis of springboot using nacos

Springboot uses nacos's example analysis, and it is believed that many inexperienced people are at a loss about it. Therefore, this article summarizes the causes and solutions of the problem. Through this article, I hope you can solve this problem. 1. Pom.xml:

2022-06-02 Development 我要分享

SSH's method of displaying basic information after logging in to the server

This article is about how SSH displays basic information after logging in to the server. The editor thinks it is very practical, so share it with you as a reference and follow the editor to have a look. The method is as follows: install landscape-common, which can be used at login time

2022-06-01 Servers 我要分享

Huawei Firewall initialization

This paper briefly introduces the initialization steps of Huawei firewall USG6306 Huawei FW can be managed in two ways: 1. Use the Console cable to connect Console interface 2. Use a network cable to connect to the network management interface G0Accord 0, this network port cannot

2022-06-01 Network Security 我要分享